furniture
 






 

Question by  brenda (18)

How should I repair a bubble in wood veneer?

 
+6

Answer by  jcm (117)

Inject a small anount of wood glue into the bubble through the hole. Then, depress the bubble flat and allow the glue to dry.

 
+5

Answer by  lorddryst (74)

Heat the venere with a blow dryer or something then roll the bubble off to a side. I hope this helps.

 
+5

Answer by  DNice (27)

You will have to get some sand paper and rub the bubble out. Then you will have to try to match your color with the new vaneer coat

 
+5

Answer by  AF6FB (23)

Use a small chisel to lift the veneer at the edge of the bubble. Inject some glue, then place a weight over the bubble until the glue dries.

 
You have 50 words left!