Question by  ninjakangaroos (45)

How do you set the time on a Massimo watch?

I need to set the time on my watch.


Answer by  JohnHolmes (2660)

On a Massimo watch you will need to pull the pin out to the full length and then change the dials until the correct time is displayed.


Answer by  mb (5482)

The Massimo watch has fine Swiss motor movements. You actually need to open up the back of the watch and adjust the gears with a jewler's flat head screwdriver. Or a jewler will do it for you.


Answer by  blueballoon (190)

I assume you mean Mossimo. At any rate, try pulling out the small knob on the side of the watch, then turning forward or back to set the dial.


Answer by  jacqui (202)

With such a precision timepiece you must be very careful not to damage the mechanism, I would recommend you take it to an approved jeweller who will have the suitable tools to do this for you.


Answer by  CLEV (405)

It can be a tricky undertaking, but here goes...for analog dials, you have to pull out the crown when the second hand is on the number 12. Other versions of the watches are equipped with a stem that makes the process much easier.


Answer by  Jakecutter (1819)

Very carefully. Since this is a Swiss watch, the gears must be turned and set by not only hand but precision. Tread carefully my friend.


Answer by  caylascreations78 (489)

It depends on whether it is digital or not. If it is, there should be H and M buttons on the side for hour and minute. If it is a regular watch, it should have a knob on the side.

You have 50 words left!