How do you replace ic chips on Panasonic 52 inch hdtv projection?

Answer by  ishiee (84)

Replacing the chip would be alot like replacing a computer processor in side your television, just pull up on the chip and then insert the new one in its place

Answer by  Gingercakes (920)

First you need the schematic of the board and a good soldering iron. Locate the chips you want to replace and carefully remove them and solder in the new ones.

Answer by  Advisor (1032)

Unless you have proper tools and static absorbers, this service should be left strictly to the professionals. All chips are labeled and will dislodge with rubber tweezers.

Answer by  Madauzz (29)

TV repair is not an easy task. You have to at least know what needs to be done. In replacing IC's of your TV, first of all, you will need to open your HDTV. Second, you have to know which part/IC you're going to replace. There's probably around 100 IC's on the TV's circuitry.

Answer by  DackThrombosis (1093)

I had a relative that once fixed television sets. I would highly recommend you don't try to replace these chips yourself. You would need to crack the seal on the set and then worry about dust and static electricity frying the components inside. Call a professional and have them do it. It is much, much safer.

Answer by  martin67 (114)

it has many chip available in the board first. find out the ic chip in it then it is replaced by heating the aluminium coat is removed which is present around the ic chip then the ic chip is taken from the board.