How do you change the bulb in a projection television?

Answer by  Nazia (33)

Turnoff TV and unplug it. Locate bulb door of the TV near power cord. slide the door open and take out the bulb by removing the screws with the help of screw driver. Install the new bulb and tightned the screws and close the door.

Answer by  Dave37 (10)

Locate the bulb door which is usually at the back of the TV, and then unscrew the screws which are sometimes thumbscrews. Carefully remove th bulb and replace with a new one. Replace the screws and then close the door.

Answer by  sajjad (107)

fist of at all turn off TV, locate the bulb door, unscrew it, first remove the bulb then pull out the bulb and reinstall new bulb tied the screw and close the door.

Answer by  sunitadas (121)

Turn off the tv,the cord should be unpluged.The bulb door is at the back near the power cord.Slide the door open to see the bulb.Unscrew the screws.Gently remove the bulb.Pull the bulb by grasping the handle and pulling stall a new bulb.Line up the groove on top of the new bulb.Tighten the screws and close the door.

Answer by  UmeshG (404)

It is a very easy task to do. first you have to remove all the screw and be careful after remove all the screw because some time there are push lock in the projection that you have to find out once you are success to open that push lock then it is easy to change the bulb. All the best.